Fences for Uneven Terrain: Is It Possible to Have Them Installed? See What You Need to Know About the Subject
That fences are essential to provide both security and privacy, we know well, right? But there is one detail that people often overlook when considering what type of fence to install on their property – the land. The terrains are not always completely flat – many of them, especially in larger areas or a little further away from large urban centers, are irregular, that is, they present unevenness along their length.
How, then, to solve this problem? Is it possible to install chain link fences even on uneven terrain? That’s exactly what we’re going to talk about in today’s article – so if you’re experiencing it, read on to find out more.
Is It Possible to Install Fences on Uneven Terrain?
Yea! But how this will be done depends a lot on the type of unevenness found – we point out that it is totally normal for the terrain to not be completely flat. But how are these irregularities? Is the difference very sharp or do you only see descents and ascents of a few centimeters?
If possible, walk around the entire perimeter of the land to investigate these issues. If the case involves only slight unevenness, it is quite likely that you will be able to get your fence installed with ease.
Basically, the installation of chain link fences involves placing support posts that will be responsible for keeping the fence that will be installed on them in place. Which means that in places with little unevenness it is possible to either ignore this issue or even try to level the irregularities manually with soil and grass. If this is your case, talk to a qualified chain-link fencing professional in the area and he will be able to guide you better in this regard.
If the terrain in question has more representative unevenness, continue reading to better understand what can be done.
Chain Link Fences for Uneven Terrain
If your land has a lot of unevenness, you may choose to either try to level the surface or maintain the unevenness. If you are still going to have a property built on the site in question, you can request land leveling directly with the contractors, who will be able to assist you in this regard and assess whether it is possible. It turns out that in many cases this is either not possible or not ideal, especially when we talk about large terrains. In such cases, what can be done? In general, the two most common solutions are:
1. Stepped Fence
In this case, the fence panels will be installed separately in order to follow the slope of the ground, that is, they will look like a staircase. This method doesn’t require leveling the ground, but it will give that ladder look to both the top and bottom of the fence. This is not always ideal if you have small pets, which can escape through the triangular space that is left open between each panel at the bottom. It is possible, however, to get around this problem with plants, bushes or even stones.
2. Racket Fence
This is an installation method that is often used on terrain with uphill and downhill terrain that is difficult or impossible to level. In this case, the fences are installed following the slope or rise. The good thing is that this type of installation doesn’t leave holes in the bottom, as with the stepped fence. On the other hand, it is only suitable for slopes of 10 degrees, otherwise it can look too uneven.
Chain Link Fences in Vancouver
Need to have chain link fences installed on a piece of land and still not sure which would be the best option for you? Get in touch with QS Fencing – we can help you with fence selection and installation. Our fecing professionals are prepared and qualified to guide you in this process, contact us.